Honeywell RT10A - Chapter 6 - Manage and Maintain the Computer; About Software Updates; About Transferring Files via USB Connection

RT10A Rugged Tablet 63
7. Network & Internet: You have the option to set up a network connection if, for
example, you want to register devices to an MDM system or the devices need to
use applications that require network access.
If you do not want to set up a network connection, tap SKIP and proceed to Step
9.
If you want to set up devices to connect to a Wi-Fi access point, enter the
network information:
a. Tap Wi-Fi Security and select either OPEN or WPA/WPA2.
b. Enter the Wi-Fi SSID. This field cannot be empty. Then tap OK.
c. Enter the Wi-Fi password. The password must be between 8 and 63
characters long. If you selected WPA/WPA2 a password is required.
d. Tap NEXT.
8. Files & Apks: (This option will not display if you chose to skip the network
settings in Step 7.) Enter the locations (URLs) of the files to be downloaded. The
URL should end with the file that you want to download. Wi-Fi Staging will
name the downloaded file with the file name in the URL.
• For security, only Local Area Network URLs are supported. Wi-Fi Staging will
ignore URLs from Wide Area Networks.
• Supported network protocol is HTTP or HTTPS.
• APK files are installed silently and automatically after download.
• Optional: You can include a file’s hash in the file name. Wi-Fi Staging
supports hash algorithms SH1 and SHA256.
9. Final Setting: Select whether you want to reboot the device after staging is
complete. You can also specify an action (intent) to launch Android activities.
10. Confirm & Staging: Review the items you have configured. Tap Confirmed,
start staging now! to begin. If you need to change a setting, tap the Back
button to return to that screen.
Wi-Fi Staging will start a hotspot on the server device and wait for clients to
connect.
11. Proceed to Set Up Client Devices on page 64.
Configurations will be distributed to any client that connects to the server device.
Once the data transmission finishes successfully, the name and serial number of
the configured client will display in the Wi-Fi Staging app on the server device, and
the client device will skip the Android setup wizard.
Note: If you included a file’s hash in Step 8, Wi-Fi Staging will validate that the hash of the
file downloaded to a device matches what you specified. If the downloaded file’s
hash does not match, the file will be removed from the device.