Honeywell RTH111 series - Heating Cycle Rate

RTH111
15 69-2604ES—01
About your new thermostat
SETUP WIRING ASSISTANCE TROUBLESHOOTING
5
5
M32733
System setup
Function 5: Heating cycle rate
5 Gas or oil furnace: Use this setting if you have a
standard gas or oil furnace that is less than 90%
efficient.
6 Electric furnace: Use this setting if you have any
type of electric heating system.
3 Hot water or high-efficiency furnace: Use this
setting if you have a hot water system or a gas
furnace of greater than 90% efficiency.
2 Gas/oil steam or gravity system: Use this setting
if you have a steam or gravity heat system.
Press the s or t button to select your heating system
and optimize its operation.
Press to
change
setting.
When finished,
press s and t
to advance to
the next function.
M32719
AND
OR