Honeywell RTH2310 - Permanent override of schedule

RTH2310 Programmable Thermostat
Permanent override of schedule
To permanently override the schedule, press the Mode
button so that the period number disappears. Press : or -
to manually set the temperature.
Press the Mode button again if you wish to cancel the
override and resume the schedule. The current period
number will appear and the thermostat will be set to the
temperature programmed for that period.
Press to permanently
override the schedule or
to cancel the override
Press to set the
temperature
10F
The period number disappears
when the schedule is
permanent/ overridden
15