Honeywell RTH2310 - In case of difficulty

Operating Manual
In case of difficulty
Screen is blank.
Temperature settings cannot be
changed.
.}. is flashing.
HI appears on the screen.
LO appears on the screen.
Ensure two fresh AA alkaline batteries are
correctly installed.
You are setting the temperature outside its
allowable range:
• Heat: 41 °F to 82 °F (5 °C to 28 °C )
• Cool: 59 "F to 95 °F (15 °C to 35 °C)
The compressor protection delay is underway.
Wait for the delay to end (maximum of 5 minutes).
The ambient (measured) temperature is above
122°F(50°C).
The ambient (measured) temperature is below
23 °F (-5 °C).
18