Honeywell RTH2510 Series - Adjusting Schedules (RTH2410 Models)

Operating Manual
69-2601ES—01 12
Mo Tu We Th Fr
Wake
Set Schedule
Set
am
75
6
:
30
M32706
To adjust program schedules (RTH2410)
1. Press SET until Set Schedule is displayed.
2. Press s or t to set your weekday Wake
time (Mo-Fr), then press SET.
3. Press s or t to set the temperature for this
time period, then press SET.
4. Set time and temperature for the next time
period (Leave). Repeat steps 2 and 3 for each
weekday time period.
5. Press SET to set weekend time periods (Sa &
Su), then press RUN to save & exit.
Note: Make sure the thermostat is set to the system
you want to program (Heat or Cool).
Press SET 3 times, then adjust time.
Press SET, then set desired temperature.