EasyManuals Logo

Honeywell RTH2510 Series Operating Instructions

Honeywell RTH2510 Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
RTH2510/RTH2410
3 69-2601ES—01
This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is set the
time and day. Then check the settings below and change if needed:
1. Set time and day (required for proper operation) .........................See page 6
2. Select system setting: Preset to Off ................................To change, see page 7
3. Select fan setting: Preset to Auto ...................................To change, see page 8
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep
....................................To change, see pages 9-12
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and
manually adjust the temperature (see pages 13-14).

Other manuals for Honeywell RTH2510 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell RTH2510 Series and is the answer not in the manual?

Honeywell RTH2510 Series Specifications

General IconGeneral
Display TypeDigital
ProgrammableYes
Power SourceBattery
Battery TypeAA Alkaline
Number of Batteries2
Temperature ControlDigital
CompatibilitySingle Stage Heating and Cooling Systems
Stages1 Heat/1 Cool
Voltage24V
Temperature Range40°F to 90°F (4°C to 32°C)
Programming Options7-Day, 5-2 Day
DisplayBacklit
Weight0.5 lbs (227 g)

Related product manuals