Honeywell RTH2510 Series Operating Instructions

RTH2510/RTH2410
15 69-2601ES—01
About your new thermostatBuilt-in compressor protection
This feature helps prevent damage to the
compressor in your air conditioning or heat
pump system.
Damagecanoccurifthecompressoris
restarted too soon after shutdown. This fea-
ture forces the compressor to wait 5 minutes
before restarting.
Duringthewaittime,thedisplaywillflash
the message CoolOn (or HeatOn if you have
a heat pump). When the safe wait time has
elapsed, the message stops flashing and the
compressor turns on.
Message flashes until safe restart
time has elapsed.
We
Wake
am
Cool
75
On
6
:
30
M32711

Honeywell RTH2510 Series Specifications

General

Display Type	Digital
Programmable	Yes
Power Source	Battery
Battery Type	AA Alkaline
Number of Batteries	2
Temperature Control	Digital
Compatibility	Single Stage Heating and Cooling Systems
Stages	1 Heat/1 Cool
Voltage	24V
Temperature Range	40°F to 90°F (4°C to 32°C)
Programming Options	7-Day, 5-2 Day
Display	Backlit
Weight	0.5 lbs (227 g)