To Next PageTo Next Page
Need help?Do you have a question about the Honeywell RTH5160 Series and is the answer not in the manual?
General| Display Type | Digital |
|---|---|
| Programmable | Non-Programmable |
| Power Source | Battery |
| Voltage | 24V |
| Stages | 1 Heat/1 Cool |
| Operating Modes | Heat, Cool, Off |
Take a detailed photo of current wiring, including terminal labels, for reference.
Note the color of R, RH, or Rc wires, excluding any jumpers used.
Document wire colors for other terminals like Y, G, C, etc., for accurate re-wiring.
Configure the R-switch and connect R, Rh, or Rc wires to their respective terminals.
Insert all remaining wires into the UWP terminals and verify secure connections.
Insert two AA alkaline batteries into the designated compartment on the thermostat.
Restore power to the heating and cooling system via the breaker box or switch.
Configure system setup options using Edit and Next buttons to personalize settings.
Details system setup numbers and their corresponding options for configuration.
Lists alert/reminder numbers, their definitions, and recommended actions.
Addresses issues with system settings, fan operation, and heating/cooling response.
