Need help?Do you have a question about the Honeywell RTS-CSA and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, and NOTE symbols for safety alerts.
Lists common hazards and precautions for operating electrical equipment.
Purpose of the manual and general advice for users.
Overview of the automatic transfer switch and its components.
Details of the transfer switch's internal components and specifications.
Description of the utility service disconnect circuit breaker.
Importance of the data decal for specifications and ordering.
Details on the enclosure type and protection against elements.
Guidelines for safe operation and referencing relevant standards.
Overview of the factory-wired installation process.
Procedure for unpacking and inspecting the transfer switch.
Instructions for mounting the transfer switch enclosure securely.
Detailed steps for wiring power source and load connections.
Wiring recommendations for control system interconnections.
Steps for testing and adjusting the installed system.
Instructions for manual operation of the transfer switch.
Step-by-step guide to connect to the utility power source.
Step-by-step guide to connect to the generator power source.
Steps to manually return the switch to the utility power source.
Procedure for verifying utility and generator voltages.
Procedure for testing generator performance under load.
Illustrates wiring and connections for liquid-cooled systems.
Illustrates wiring and connections for air-cooled systems.
Details physical enclosure sizes and conduit knockout locations.
Specific dimensions for 200A service entrance enclosures.
Details warranty coverage for Honeywell emergency transfer switches.
Outlines warranty coverage for Year One and Year Two components.
Lists conditions and causes not covered by the warranty.
To Next Page
General