To Next PageTo Next Page
Need help?Do you have a question about the Honeywell RXSW200A3CULH and is the answer not in the manual?
Provides an overview of the product and importance of reading the manual for safe operation.
Manufacturer's disclaimer on hazards, user responsibility, and explanation of safety symbols.
Details DANGER, WARNING, and CAUTION statements regarding electrocution and equipment damage.
Outlines other safety risks like backfeed, unauthorized access, and general precautions for safe operation.
Instructions for inspecting the transfer switch upon arrival and its basic components.
Details the single-phase mechanism, conductor sizes, and model specifications.
Describes the enclosure type, data decal, and introduces load management modules (SACM, SMM).
Lists key installation procedures and safety checks before beginning the process.
Details step-by-step instructions for opening the transfer switch enclosure and mounting it.
Instructions for connecting utility and generator power sources and load leads safely.
Explains connecting generator start circuit wires and the Smart A/C Module (SACM).
Details the function of auxiliary contacts and the process for applying the fault current label.
Outlines procedures for verifying installation and manually operating the transfer switch.
Guides for manually switching the load between utility and generator source sides.
Instructions for performing voltage checks and testing the generator under load.
Steps to verify automatic transfer sequence and safely shut down the generator.
Provides dimensional details and mounting information for the transfer switch enclosure.
Shows wiring diagrams for connecting the transfer switch to utility, generator, and loads.
General