Honeywell S8600B Installation Instructions

9
69-1954—01
S8600B,C,H,M; S8610B,C,H,M; S8670D,E,J,K INTERMITTENT PILOT GAS IGNITION CONTROL
บริษัท เอดีดี เฟอร์เนส จํากัด
ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี 70 ถนนบรมราชชนนี แขวงศาลาธรรมสพน์ เขตทวีวัฒนา กรุงเทพฯ 10170
โทร: 02-888-3472 โทร: ออกแบบ:08-08-170-170 แฟกซ์: 02-888-3258
https://www.add-furnace.com E-mail: sales@add-furnace.com
OPERATING SEQUENCE - STANDARD MODELS
S8600 C, M; S8610 C, M = RETRY
S8600 B, H; S8610 B, H = LOCKOUT
Fig. 9. Normal Operating Sequence for Standard Models.
A
RETRY
FLAME
PROVED?
NO
RETRY OR
LOCKOUT
MODEL?
LOCKOUT
(BEFORE TRIAL FOR IGNITION TIMER EXPIRES)
YES
NO
“CALL
F NO
OR HEAT”
ENDS?
LOST?
FLAME
YES
A
YES
M29905
IDLE
(NOT POWERED)
“CALL FOR
HEAT”
RECEIVED FROM
THERMOSTAT
POWER TO
MODULE AND
SELF CHECK
TRIAL FOR
IGNITION
(TIMER STARTED)
SPARK OFF
OPEN MAIN GAS
VALVE
FLAME
STABILIZATION
(2 SECONDS)
RUN
CLOSE MAIN GAS
VALVE AND
PILOT GAS
VALVE
WAIT FOR
“CALL FOR HEAT”
TO BE REMOVED
ACTIVATE ALARM
CONTACT(S)
(OPTIONAL)
RETRY DELAY
(5 MINUTES)
SPARK ON
OPEN PILOT GAS
VALVE
CLOSE PILOT
GAS VALVE
SPARK OFF
CLOSE MAIN GAS
VALVE AND
PILOT GAS
VALVE

Honeywell S8600B Specifications

General

Brand	Honeywell
Model	S8600B
Category	Control Unit
Language	English