4. Gently pull a new foam earpad around the plate.
5. Align the inside posts of the two sections of the earcup.
6. Push sections together until they click into place.
SRX2/SRX3 High-Noise Headset
The SRX2/SRX3 High-Noise headset is a headset with a single ear cup that fits
entirely over the operator's ear to allow him or her to hear voice instructions
clearly in areas of high environmental noise. Combined with the optimal speech
recognition of the headset using SoundSense, this model offers an effective
wireless solution for an industrial environment.
The single cup design gives operators the option of wearing the headset
speaker on either ear for their long-term comfort. It also provides protection in
very cold environments, such as a warehouse freezer.
NOTE
The high-noise headset has microphone cap storage
located on the headband and above the headset earcup.
33 SRX3 User Guide - Preliminary
To Next Page
Loading...
