2. Clean the contacts, if necessary.
l Use an isopropyl alcohol (isopropanol) swab or soft cloth dampened
with isopropyl alcohol to clean metal connection points.
l If dirt or residue cannot be removed with the alcohol swab or cloth, use a
soft, non-abrasive rubber eraser to clean metal connection points. You
can also use a three-row toothbrush style, general cleaning brush with
natural hog hair bristles to gently brush away dirt on the contacts.
l Wipe again with isopropyl alcohol.
3. Try various combinations of batteries and chargers to determine if the
condition is specific to the battery or to the charger.
l If the condition is specific to the battery, give the battery to your system
administrator.
l If the condition is specific to the charger, disconnect the charger from
its power source for about five seconds, then reconnect it. Test the
charger with a battery. If the same condition occurs, return the charger
for service.
SRX3 User Guide - Preliminary 60
To Next Page
Loading...
