OPERATOR MANUAL // SECTION 3
TROUBLESHOOTING AND MAINTENANCE
HONEYWELL 24
3.4 Detector Repair
Return the defective module to the factory for repair service.
There are no user serviceable parts in the detector module
If the Model SS4-AS/-AS2 Module must be shipped back to the factory for repair,
it MUST be packed in static protective material. If not available, the Module
should be carefully wrapped with aluminum foil. An RMA (Return Material
Authorization) is required for all returns to the factory. Contact Honeywell
Analytics Customer Service or your Distributor for an RMA number before
shipping a unit back to the factory.
To Next Page
Loading...
