Honeywell ST6300 - User Manual

ST6300
ELECTRONIC PROGRAMMER
HEATING CONTROLS
FEATURES
■
One or two ON/OFF periods per day.
■
Built-in battery back-up.
■
Built-in start-up programme.
■
Clear digital display.
■
Ease of operation.
■
Temporary or permanent over-ride
facilities.
■
12 hour time display with am/pm
indication.
■
Simple change to 24 hour
clock display.
■
Programme indicator lights.
■
Double insulated.
■
Extra hour facility for one hour
boost or programme extension.
■
Earth wire parking
terminal.
APPLICATION
The ST6300A is an electronic central heating time control
programmer that can be used on fully pumped systems having
separate heating and hot water temperature control where
common switching times for heating and hot water are required.
A hinged cover conceals the programming buttons when not in
use, leaving only the override and extra hour buttons exposed.
The front cover also carries abbreviated user instructions on the
inside for permanent ready reference.
2.13
HOT WATER
HEATING
OVERRIDE
EXTRA HOUR
Mon Tue Wed Thu Fri Sat Sun
ON
OFF
ON
OFF
ON
OFF
HOT WATER
HEATING
OVERRIDE
EXTRA HOUR
Mon Tue Wed Thu Fri Sat Sun
ON
OFF
ON
OFF
SET TIME –
SET PROGRAMME –
RUN PROGRAMME –
–+
RESET
NEXT ON/OFF
ON
OFF
COPY
DAY
AUTO
ONCE CONT.

Honeywell ST6300 Specifications

General

Display	LCD
Power Supply	230V AC
Temperature Range	5°C to 30°C
Program Schedule	7-day programming
Mounting	Wall-mounted
Contact Voltage	230V AC
Programmable	Yes
Compatibility	Heating systems
Contact Current	3A resistive
Operating Temperature	0°C to 40°C
Switching Type	Single Pole, Double Throw (SPDT)

Summary

Features of the ST6300 Programmer

Application of the ST6300 A Programmer

Product Description

Details the ST6300A as an electronic central heating time control programmer for fully pumped systems.

Installation Guide

Ordering Specification

Wiring Diagram and Components

Technical Specifications

Product Dimensions