2 of 8 34-ST-99-22 (Addendum to 33-ST-25-14B) 06/03
Additions to the
User Manual
The additions and changes to User Manual 34-ST-25-14B that relate to the newly
designed meter body and process heads are given in Table 1 of this addendum.
Use the information in Table 1 to reference and annotate your User Manual.
Table 1 Additions/Changes to the User Manual
Page # in User
Manual
Sub-Section Description of Change
21
3.3 Considerations for ST 3000
Transmitter
Table 6 Transmitter
Overpressure Ratings
The Maximum Working Pressure Rating and the
Overpressure Rating has been enhanced for all
models included in this addendum except for the
draft range transmitter.
For more information, refer to Table 6 in this
Addendum.
41
4.3 Piping ST3000 Transmitter
Table 15 Installing Flange
Adapter
In Step 5, do not use the torque specification of 47.5
to 54 N∙m (35 to 40 lb-ft).
Instead, torque Flange Adapter bolts evenly to
47,5 N·m +/- 2,4 N·m (35 Lb-Ft +/- 1.8 Lb-Ft).
174
9.3 Inspecting and Cleaning
Barrier Diaphragms
Table 54 Process Head Bolt
Torque Ratings
In Step 8, do not use specifications for head bolt
torque given in Table 54.
Instead, torque head bolts/nuts to the specifications
given in Table 2 of this addendum.
179/180
9.5 Replacing Meter Body
Table 56 Replacing Meter Body
Only
In Step 9, the reference to Table 48 for applying
torque to head bolts/nuts should be as given in
Table 2 of this addendum.
214-217
12.1 Replacement Parts
Figure 57 and Table 71
Figure 57 illustrates the replacement parts available
for the previous design of meter body and process
heads, and Table 71 provides part numbers and
descriptions for the parts called out in Figure 57.
For the newly designed meter body and process
heads, use Figure 1 of this addendum to locate
replacement parts, and use
Table 3 of this
addendum for part numbers and descriptions.
For applicability of parts, refer to the appropriate
Manuals, following.
ST 3000 Smart Transmitter
Series 100 Differential Pressure Models
Specification and Model Selection Guide
34-ST-03-60
ST 3000 Smart Pressure Transmitter
Series 900 Differential Pressure Models
Specification and Model Selection Guide
34-ST-03-65