Honeywell T6 Pro Installation Instructions

11
Installer system test
To perform a System Test:
1 Press and hold CENTER and buttons for
approximately 3 seconds to enter advanced
menu.
2 Use to go to TEST. Press Select to enter
System Test.
3 Use to change between Heat, Cool, Fan, Em
Heat, or Ver (thermostat version information).
Press Select.
4 Press to turn stages on one at a time, and
press to turn them off.
5 Use the Home button to exit the System Test.
System test System status
Shaded areas below apply only to TH6320U/TH6220U or as otherwise noted.
Heat
0
All Off
1
Heat Stage 1 on
2
Heat Stage 2 also on
3
Heat Stage 3 also on
Cool
0
All Off
1
Cool Stage 1 on
2
Cool Stage 2 also on
Em Heat
0
All Off
1
Em Heat on
Fan
0
Fan Off
1
Fan On

Honeywell T6 Pro Specifications

General

Display	Touchscreen
Energy Star Certified	Yes
Power Source	Battery or Hardwired
Operating Modes	Heat, Cool, Auto, Off
Geofencing	Yes
Compatibility	Works with most HVAC systems
Fan Modes	Auto, On, Circulate
Remote Access	Yes
Energy Saving Features	Smart Response Technology
Connectivity	Wi-Fi
Warranty	5-year limited warranty