Honeywell T775U Series Installation Instructions

1. SETUP T775U SERIES 2000 CONTROLLER
21 62-0255–05
Fig. 45. Setup - Outputs - Number of Relays.
1.3.2. NBR OF RELAYS
1. From the Outputs menu, use the Sand T buttons
to highlight # RELAYS.
2. Press the X button to display the number of relays.
3. Use the S and T buttons to display the number
from 1 to 2.
4. Press the X button to accept the value and display
the Outputs menu.
The number of relay outputs entered here determines
how many relays display on the home screen.
Fig. 46. Setup - Outputs - Options Menu.
1.3.3. OPTIONS
1. From the Outputs menu, use the Sand T buttons
to highlight OPTIONS.
2. Press the X button to display the Options menu.
Fig. 47. Setup - Outputs - Options - Schedule.
1.3.3.1. USE SCHED
1. Press the X button to display the schedule selections.
2. Use the Sand T buttons to highlight YES or NO.
Default: NO
3. Press the X button to accept the value and display
the MIN OFF option.
Selecting NO disables scheduling for all outputs.
Selecting YES enables scheduling for all outputs. When
YES is selected, all individual outputs default to follow the
schedule. However, each individual output can be
removed from scheduling as desired.
With Scheduling enabled, when you return to Program
mode, the new option for Scheduling displays. You can
press the HOME button and then the MENU button to
view the Schedule options in the menu.
See “1.3.1.5. SCHEDULE” on page 19.
SETUP
OUTPUTS
# RELAYS
ENTER
NUMBER OF
RELAYS
SETUP
OUTPUTS
# RELAYS
2
M24607
SETUP
OUTPUTS
OPTIONS
SETUP
OUTPUTS
OPTIONS
USE SCHED
MIN OFF
MIN ON
DI OPTS
SHOW RT
EXIT
M24608
A
SETUP
OUTPUTS
OPTIONS
USE SCHED
SETUP
OUTPUTS
OPTIONS
USE SCHED
USE
SCHEDULE
FOR
OUTPUTS
YES
NO
M24609

Honeywell T775U Series Specifications

General

Brand	Honeywell
Model	T775U Series
Category	Controller
Language	English