Need help?Do you have a question about the Honeywell T8131C and is the answer not in the manual?
General| Power Source | Battery or Hardwired |
|---|---|
| Display Type | Digital |
| Stages | 1 Heat / 1 Cool |
| Terminal Designations | R, W, Y, G |
| Mounting | Wall Mount |
| Temperature Control Range | 40 to 90°F (4 to 32°C) |
| Application | Residential |
Details how to set the WAKE period for comfortable morning temperatures and includes lead time considerations.
Explains setting the LEAVE period for energy-saving temperatures when away at work or school.
Details setting the RETURN period for comfortable temperatures before bedtime, including lead time.
Describes setting the SLEEP period for energy-saving temperatures during nighttime hours.
Details the schedule for setting start times and heating temperatures for weekdays and weekends.
Details the schedule for setting start times and cooling temperatures for weekdays and weekends.
Instructions on how to set the current time and day on the thermostat for accurate programming.
Guide to programming the heating schedule, including setting WAKE, MON-FRI, and temperature.
Guide to programming the cooling schedule, following similar steps as the heating program.
How to temporarily adjust the temperature for the current period without altering the program.
Instructions for setting a fixed temperature indefinitely, and how to cancel the hold.
How to review programmed times and temperatures for both weekday and weekend schedules.
Steps to cancel a programmed schedule on the thermostat.
Instructions on how to permanently modify an existing program schedule.
How to exit programming mode and return to the thermostat's normal operating state.
Explains the AUTO and ON settings for the fan switch and their operational implications.
Details the COOL, OFF, and HEAT settings for the system switch and their functions.
Solutions for when the thermostat display remains blank.
Explanation for temperature display limits during programming.
Diagnosing and correcting issues with temperature changes happening at incorrect times.
Steps to resolve issues where the heating system fails to activate.
Solutions for when the air conditioning system fails to activate.
Addressing problems where the house is too warm or too cool.
Diagnosing why heat is not reaching registers when the system is on.
Resolving issues with HVAC system cycles being too short or too long.
Resolving the 'bAt Lo' display error after installing new batteries.
To Next Page