EasyManuals Logo

Honeywell T8132C User Manual

Honeywell T8132C
6 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
69-0889 6
Home and Building Control Home and Building Control Helping You Control Your World
Honeywell Inc. Honeywell LimitedHoneywell Limitée
1985 Douglas Drive North 740 Ellesmere Road
Golden Valley, MN 55422 Scarborough, Ontario
M1P 2V9
Printed in Mexico
QUALITY IS KEY
Furnace or air conditioner cycles too Check system setting on back of thermostat.
frequently.
The burner on-time Readjust according to instructions on page 2.
is too short or too long.
IF… THEN…
The thermostat current setting does Check that the wiring hole in the wall behind the wallplate was
not match the display temperature. plugged with insulation to prevent drafts that might adversely affect
thermostat operation.
Be aware that it is normal for the current setting and display temperature
to differ occasionally.
bAt Lo remains on display after Remove batteries. Wait one hour. Install fresh alkaline batteries.
fresh batteries have been installed

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell T8132C and is the answer not in the manual?

Honeywell T8132C Specifications

General IconGeneral
BrandHoneywell
ModelT8132C
CategoryThermostat
LanguageEnglish

Related product manuals