Honeywell T8602C Chronotherm IV Installation Instructions

T8602C CHRONOTHERM
®
IV DELUXE PROGRAMMABLE THERMOSTATS
7 69-1670
IMPORTANT
Review the settings to confirm that they match
the system. Press Run Program to exit the
Installer Setup. The thermostat has saved the
Installer Setup changes and initiated a reset in
order to operate using the new settings. Be sure
to set the current day and time immediately.
Temperature
display
adjustment.
37 0 No difference in
displayed
temperature and
actual room
temperature.
3 thru -3 1—Display adjusts to 1°F
higher than actual room
temperature.
2—Display adjusts to 2°F
higher than actual room
temperature.
3—Display adjusts to 3°F
higher than actual room
temperature.
-1—Display adjusts to 1°F
lower than actual room
temperature.
-2—Display adjusts to 2°F
lower than actual room
temperature.
-3—Display adjusts to 3°F
lower than actual room
temperature.
Furnace Air
Filter Timer.
43 2 90 days (calendar
days)
0, 1, 3, 4 0 – off
1 – 30 days
3 – 180 days
4 – 365 days
(Time is counted by calendar
days in any mode.)
Humidifier Pad
Monitor.
44 0 Off 1, 2, 3 1 – 90 days
2 – 180 days
3 – 365 days
(Time is counted by calendar
days in heat mode.)
Ultraviolet (UV)
Air Treatment
System Lamp
Monitor.
45 0 Off 1 1 – 365 days
(Time is counted by calendar
days in any mode.)
Table 3. Thermostat Installer Setup Options. (Continued)
Select
Installer Setup
Number (Press
Time ∆ key to
change)
Factory Setting
Other Choices
(Press  or  key to change)
Actual
SettingDisplay Description Display Description

Honeywell T8602C Chronotherm IV Specifications

General

Brand	Honeywell
Model	T8602C Chronotherm IV
Category	Thermostat
Language	English