Honeywell T8602C Chronotherm IV User Manual

T8602C CHRONOTHERM® IV DELUXE PROGRAMMABLE THERMOSTATS
Table 3. Thermostat Installer Setup Options. (Continued)
Select
Installer Setup
Number (Press
Time A key to
change)
Factory Setting
Other Choices
(Press s or t key to change)
Actual
SettingDisplay Description Display Description
Temperature
display
adjustment.
37 0 No difference in
displayed
temperature and
actual room
temperature.
1.5 thru -
1.5
.5—Display adjusts to 0.5°C
higher than actual room
temperature.
1.0—Display adjusts to
1.0°C higher than actual
room temperature.
1.5—Display adjusts to
1.5°C higher than actual
room temperature.
-.5—Display adjusts to -.5°C
lower than actual room
temperature.
-1.0—Display adjusts to
-1.0°C lower than actual
room temperature.
-1.5—Display adjusts to
-1.5°C lower than actual
room temperature.
Furnace Air
Filter Timer.
43 0 Off 1, 2, 3, 4 1 - 10 days
2 - 30 days
3 - 60 days
4 - 120 days
(Time is counted when heat,
cool or fan is running.)
Humidifier Pad
Monitor.
44 0 Off 1, 2, 3 1 - 90 days
2 - 180 days
3 - 365 days
(Time is counted by calendar
days in heat mode.)
Ultraviolet (UV)
Air Treatment
System Lamp
Monitor.
45 0 Off 1 1 - 365 days
(Time is counted by calendar
days in any mode.)
IMPORTANT
Review the settings to confirm that they match
the system. Press Run Program to exit the
Installer Setup. The thermostat has saved the
Installer Setup changes and initiated a reset in
order to operate using the new settings. Be sure
to set the current day and time immediately.
7 69-1509—2

Honeywell T8602C Chronotherm IV Specifications

General

Brand	Honeywell
Model	T8602C Chronotherm IV
Category	Thermostat
Language	English