OWNER’S GUIDE
1
About Your New Thermostat
This thermostat can be used to control an electric heating system such as a
baseboard heater, a radiant floor, a radiant ceiling, a convector or a fan-
forced heater.
The thermostat CANNOT be used with:
• a resistive load under 0.83 A
• a resistive load over 10.4 A
• a system driven by a contactor or a relay (inductive load)
• a central heating system
SUPPLIED PARTS
•One (1) thermostat
• Two (2) 6-32 mounting screws
• Two (2) solderless connectors
69-2551EFS-03 (TH401 Cadet) 5 x 3.5.book Page 1 Thursday, August 27, 2020 11:40 AM
To Next Page
Loading...
