TH401
2
Temperature Display and Setting
The thermostat normally displays the actual (ambient) temperature.
• To view the setpoint temperature, briefly press the Up or Down button. The setpoint
will be displayed for 5 seconds and the screen illuminated for 12 seconds.
• To change the setpoint temperature, press the Up or Down button until the desired
value is displayed.
Temperature display
Heating intensity indicator.
(No image appears when
heating is off.)
Up button
Down
button
Appears when the setpoint is displayed
Appears when the thermostat
is configured for 5-minute
cycles. The thermostat must
be set to this configuration if
it is controlling a fan-forced
heater.
69-2551EFS-03 (TH401 Cadet) 5 x 3.5.book Page 2 Thursday, August 27, 2020 11:40 AM
To Next Page
Loading...
