Operating Manual
69-2404EFS—01 2
About your new thermostat
Your new thermostat is pre-programmed and ready to go. Just set the time and day.
Then check the settings below and change if needed:
1. Set clock ........................................................................................................See page 5
2. Select fan setting: Preset to Auto ..............................................................See page 6
3. Select system setting: Preset to Heat ......................................................See page 7
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) ........................................................................ See pages 8-11
5. Set humification, dehumidification
& ventilation controls, if applicable ............................................... See pages 17-19
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 10-11).
To Next Page
Loading...
