Doc ID - 1188 • Rev 04 7 / 8
4. Configure the Event Part as below.
• Event Type: Device Property Change Event
Note: This event type is replacing the Device Property Value Event.
• Device: Honeywell WiFi thermostat
• Function: Heat Cool Temperature Actuator
• Property: Unit
• Constraint: >
• Value: 72
5. Configure the Action part as below.
• Action Type: Send Email
• Recipients: The homeowner’s Email address
Note: To add an Email address, you must click the green plus icon . Do
this for each desired Email recipient.
• Subject: The purpose of the alarm
• Text: The information included in the email
6. Click the Save button , and then deploy the project.
To Next Page
Loading...
