Honeywell THP2400A1019 User Manual

INSTALLATION GUIDE
69-2762EFS-02
THP2400A1019
Cover Plate Assembly
APPLICATION
Use the THP2400A1019 cover plate assembly with the RedLINK™ VisionPRO
®
or Wi-Fi VisionPRO® thermostats.
Use the THP2400A1019 cover plate assembly to cover marks on the wall or to mount the thermostat to a 2 in. x
4 in. electrical box.
The THP2400A1019 cover plate assembly contains one cover plate, one bracket, two #6-32 x 5/8 flat head
screws and two #6-32 x 1/4 pan head screws. See Fig. 1.
Fig. 1. THP2400A1019 cover plate assembly.
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous
condition.
2. Check ratings given in the instructions and on the product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.
M34258
TWO #6-32 X 5/8 FLAT HEAD SCREWS
TWO #6-32 X 1/4 PAN HEAD SCREWS
BRACKET
LEVEL
LEVEL
25/32
(20)
6-5/32
(156)
1-1/2
(38)
5-3/4
(146)

Honeywell THP2400A1019 Specifications

General

Power Source	Hardwired
Programmable	Yes
Voltage	24 Vac
Backup Battery	No
Compatibility	Single Stage Heating and Cooling Systems
Display	LCD
Temperature Range	40°F to 90°F

Summary

Application

Installation Procedures

Mount Cover Plate Directly to Wall

Instructions for mounting the cover plate directly onto the wall using screws and anchors.

Mount Cover Plate to Vertical Electrical Box

Instructions for mounting the cover plate to a vertical 2x4 electrical box.

Mount Cover Plate to Horizontal Electrical Box

Instructions for mounting the cover plate to a horizontal 2x4 electrical box.