Honeywell TL8100 Installation Instructions

TL8100 PROGRAMMABLE THERMOSTAT
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Toronto, Ontario M1V 4Z9
customer.honeywell.com
® U.S. Registered Trademark
© 2010 Honeywell International Inc.
69-2017EFS—01 M.S. Rev. 04-10
Printed in U.S.A.
5. POWER-UP
When you install the batteries, the unit
performs a series of tests for a few seconds
before displaying the ambient temperature.
It is normal that the displayed temperature be
higher than the ambient temperature if you are
holding the thermostat. Once installed on the
wall, the thermostat will display the true
ambient temperature after one hour.

Honeywell TL8100 Specifications

General

Stages	1 Heat / 1 Cool
Temperature Control	±1°F (±0.5°C)
Hold Feature	Yes
Filter Change Alert	Yes
Color	White
Programmability	Programmable
Power Source	Battery
Display	Backlit
Compatibility	Compatible with most heating and cooling systems
Dimensions	5.5 x 3.5 x 1 inches
Type	Programmable Thermostat