Need help?Do you have a question about the Honeywell TrueZONE HZ432 and is the answer not in the manual?
General| Zones | 4 |
|---|---|
| Compatibility | Conventional and heat pump systems |
| Maximum Current per Zone | 1.0 A |
| Maximum Total Current | 3.0 A |
| Power Supply | 24VAC |
| Transformer | 40 VA |
| Wiring | 18 AWG recommended |
| Compatible Thermostats | Any 24 VAC thermostat |
| Stages | 3 Heat/2 Cool |
Easy-to-follow digital display guides installer through four simple setup steps.
Standardizes checkout ensuring all zones operate correctly before leaving the job site.
Push-in terminal blocks allow for faster wiring with no screwdriver needed.
Indicate zone calling status, stage, and emergency heat.
Works with virtually any brand equipment for zone control.
Wire channel and anchors facilitate neat wire management.
Allows mounting anywhere, with panels being 8 inches wide.
Reduces blower speed in cooling when one zone is calling.
Downstages equipment when discharge air temperature is near the limit.
Dual-fuel changeover based on outdoor temperature and/or thermostat staging.
Details terminal connections for thermostat zone 1.
Details terminal connections for thermostat zone 2.
Details terminal connections for thermostat zone 3.
Details terminal connections for thermostat zone 4.
Details terminal connections for system equipment.
Details terminal connections for power and accessories.
Details terminal connections for sensors.
Overview of the panel's control buttons and display.
List of TrueZONE panel part numbers and their descriptions.
List of compatible Honeywell thermostats with part numbers and features.
List of round and rectangular dampers with part numbers and sizes.
To Next Page
