Honeywell LYNX Touch 5100 User Manual

LYNX Touch
Security System
Programming Guide
800-11060 2/12 Rev. A

Honeywell LYNX Touch 5100 Specifications

General

Wireless Frequency	345 MHz
Communication	Wi-Fi, GSM, CDMA, or IP
Compatibility	Honeywell 5800 series wireless devices
Siren	Built-in siren
Partitions	2
Power Supply Details	Plug-in transformer
Battery Backup	Rechargeable battery
Communication Type	Wireless
Zones	Up to 64 wireless zones

Summary

Entering Programming Mode

Data Fields: Installer Code and System Type

Change Installer Code

Procedure to modify the system's installer access code.

Program System Type Options

Configure parameters like RF Jam, Speaker Phone, and Two-Way Voice.

System Type Configuration Parameters

Communication Path and Network Settings

Communications Path and IP Address Configuration

Configure communication path (IP, GSM, WiFi) and IP address details.

Zone Programming

Zone Enrollment and Identification

Enroll new zones by serial number or RF learning.

Zone Description and Device Type

Assign descriptions and select device types for programmed zones.

Response Type and Supervision

Configure zone response types and supervision settings.

Keypad and Button Programming

Key Type and User Association

Define key types (e.g., 4-button) and associate them with users.

Button Key Function Assignment

Assign specific functions (Arm Away, Disarm) to keypad buttons.

Reporter and Central Station Settings

Primary Central Station Information

Configure primary central station contact details and reporting options.

Secondary Central Station Information

Configure secondary central station contact details and reporting options.

Sounder and Alarm Options

Burglary and Fire Bell Timings

Set burglary and fire bell timeouts, and alarm confirmation sounds.

System Settings: Delays and Arming

Entry and Exit Delay Configuration

Set the duration for entry and exit delays for arming/disarming.

Lynx Touch Series Connections Summary

Wiring and Power Supply Connections

Diagram and notes on connecting power supply and wiring.