Honeywell LYNX Touch 5100 - Table of Contents

Table of Contents
Entering Programming Mode.................................................................................................................................... 3
Programming the Data Fields................................................................................................................................... 3
Loading a Default Set ............................................................................................................................................... 3
Exiting Programming Mode ...................................................................................................................................... 3
Data Fields................................................................................................................................................................ 4
Change Installer Code........................................................................................................................................... 4
Program System Type........................................................................................................................................... 4
Program Date and Time........................................................................................................................................ 5
Program Communications.....................................................................................................................................5
Program Zones...................................................................................................................................................... 7
Program Keys........................................................................................................................................................ 8
Program Reporter.................................................................................................................................................. 9
Program Sounder................................................................................................................................................ 13
Program System Settings.................................................................................................................................... 14
Program the Z-Wave Module.............................................................................................................................. 16
Zone Programming Worksheet .............................................................................................................................. 17
Explanation of Zone Assignment Table Headings .............................................................................................. 18
5800 Series Transmitter Loop Numbers Diagram..................................................................................................19
Programming Default Tables..................................................................................................................................20
LYNX Touch Summary of Connections Diagram................................................................................................... 23
Refer to the LYNX Touch Series Installation and Setup Guide P/N 800-10614 or later for detailed information on
programming the system. The Installation and Setup Guide contains full descriptions for all data fields.
UL
LYNX Touch is not intended for UL985 Household Fire applications unless a 24-hour backup
battery (P/N LYNXRCHKIT-SHA) is installed.