Need help?Do you have a question about the Honeywell NOTIFIER NFW-50X and is the answer not in the manual?
General| Model | NFW-50X |
|---|---|
| Type | Fire Alarm Control Panel |
| Output Current | 3.0 A |
| Operating Voltage | 24 VDC |
| Operating Temperature Range | 32°F to 120°F (0°C to 49°C) |
| Humidity Range | 10% to 93% non-condensing |
| Enclosure Type | Metal |
| Compatibility | Compatible with NOTIFIER devices |
| Power Supply | 120/240 VAC, 50/60 Hz |
| Weight | 25 lbs |
| NAC Circuits | 4 |
| Power | 120/240 VAC, 50/60 Hz |
| Communication | RS-485 |
Emphasizes safety during installation and handling of components.
Lists key capabilities and functionalities of the FACP.
Details electrical, loop, and circuit specifications.
Details the central processing unit and communication module.
Covers backbox installation and handling of static-sensitive components.
Details connecting AC power and earth ground for safety.
Explains how to connect the battery backup system.
Details Class B and Class A NAC wiring methods.
Details critical wiring separation and limitations for safety.
Covers physical connection and DIP switch settings.
Details password management for programming access.
Covers automatic device setup and individual point configuration.
Details enabling, disabling, and special purpose zones.
Details SLC loop class and protocol settings.
Explains various system-wide settings and options.
Details settings for the communicators.
Configures telephone line settings and gains.
Details Ethernet and GSM communication setup.
Configures transmission format and event reporting.
Covers enabling ANN-BUS and assigning addresses.
How to change system passwords.
Procedures for clearing and verifying program data.
Details checking program integrity.
Covers performing walktests and system settings.
Explains button functions and status LEDs.
To Next Page