Need help?Do you have a question about the Honeywell NOTIFIER ID2002 and is the answer not in the manual?
Requirements and procedure for mounting the back box to the wall.
Describes main chassis, processing, user-interface, and I/O PCBs.
Rules for cable entry, screening, termination, and mains supply connection.
Procedure for fitting the Kit PSU3A module to the main chassis.
Describes main chassis features and fitting procedure for different PSU/module configurations.
Typical connections and checks for analogue addressable devices on a loop.
Details on battery types, ratings, and connection procedures for Kit PSU3A.
Requirements and procedure for mounting the back box to the wall.
Describes main chassis, processing, user-interface, and I/O PCBs.
Rules for cable entry, screening, termination, and mains supply connection.
Procedure for fitting the Kit PSU3A module to the main chassis.
Describes main chassis features and fitting procedure for different PSU/module configurations.
Typical connections and checks for analogue addressable devices on a loop.
Details on battery types, ratings, and connection procedures for Kit PSU3A.
General| Number of Zones | 2 |
|---|---|
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Batteries | 2 x 12V, 7Ah (Sealed Lead Acid) |
| Mounting | Wall Mount |
| LCD | Yes |
| Networking | Supports NOTI-FIRE-NET Protocol |
| Operating Voltage | 24 VDC |
| Humidity Range | 10% to 93% relative humidity, noncondensing |
| Dimensions | 14.5" (36.83 cm) W |
| Weight | 15 lbs (6.8 kg) |
To Next Page