EasyManuals Logo
Home>Honeywell>Control Panel>Notifier NFS-320

Honeywell Notifier NFS-320 User Manual

Honeywell Notifier NFS-320
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DN-7112:P • 12/20/2020 — Page 1 of 7
7112pho1.jpg
NFS-320 Intelligent Addressable Fire Alarm Control Panel
General
The NFS-320 intelligent Fire Alarm Control Panel is part of the
ONYX
®
Series of Fire Alarm Controls from NOTIFIER.
In stand-alone or network configurations, ONYX Series products
meet virtually every application requirement.
The NFS-320’s modular design makes system planning easier. The
panel can be configured with just a few devices for small building
applications, or networked with many devices to protect a large cam-
pus or a high-rise office block. Simply add additional peripheral
equipment to suit the application. Wireless fire protection can be
added with the SWIFT wireless gateway and devices.
For installations using NFS-320C, an optional ACM Series annunci-
ator can be mounted in the same cabinet (up to 48 zones/points,
order separately; see DN-60085).
NOTE: Unless called out with a version-specific “R”, “C” or “E” at the end
of the part number, “NFS-320” refers to models NFS-320, NFS-320R,
NFS-320C, and NFS-320E.
Features
Certified for seismic applications when used with the appropriate
seismic mounting kit.
Approved for Marine applications when used with listed compati-
ble equipment. See DN-60688.
One isolated intelligent Signaling Line Circuit (SLC) Class A, B,
or X.
Up to 159 detectors and 159 modules per SLC; 318 devices max-
imum.
Detectors can be any mix of ion, photo, thermal, or multi-sen-
sor; wireless detectors are available for use with the FWSG.
Modules include addressable pull stations, normally open con-
tact devices, two-wire smoke detectors, notification, or relay;
wireless modules are available for use with the FWSG.
Optional FWSG Wireless SWIFT Gateway supports wireless SLC
devices.
Standard 80-character display.
Network options:
High-speed network for up to 200 nodes (NFS2-3030, NFS2-
640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM,
ONYXWorks, NFS-3030, NFS-640, and NCA).
Standard
network for up to 103 nodes (NFS2-3030, NFS2-640,
NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM, ONYX-
Works, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/
400, AFP-1010, and AM2020). Up to 54 nodes when DVC-EM
is used in network paging.
6.0 A power supply with four Class A/B built-in Notification Appli-
ance Circuits (NAC). Selectable System Sensor, Wheelock, or
Gentex strobe synchronization.
Built-in Alarm, Trouble, Security, and Supervisory relays.
VeriFire
®
Tools online or offline programming utility. Upload/
Download, save, store, check, compare, and simulate panel data-
bases. Upgrade panel firmware.
Autoprogramming and Walk Test reports.
Multiple central station communication options:
Standard UDACT
Internet
Internet/GSM
80-character remote annunciators (up to 32).
EIA-485 annunciators, including custom graphics.
Printer interface (80-column and 40-column printers).
History file with 800-event capacity in nonvolatile memory, plus
separate 200-event alarm-only file.
Alarm Verification selection per point, with automatic counter.
Presignal/Positive Alarm Sequence (PAS).
Silence inhibit and Auto Silence timer options.
NAC coding functions:
March time.
Temporal.
California two-stage coding.
Canadian two-stage.
Strobe synchronization.
Field-programmable on panel or on PC with VeriFire
®
Tools pro-
gram check, compare, simulate.
Full QWERTY keypad.
Battery charger supports 18 – 200 AH batteries.
Non-alarm points for lower priority functions.
Remote ACK/Signal Silence/System Reset/Drill via monitor mod-
ules.
Automatic time control functions, with holiday exceptions.
Extensive, built-in transient protection.
Powerful Boolean logic equations.
SWIFT WIRELESS
Self-healing mesh wireless protocol.
Each SWIFT Gateway supports up to 50 devices: 1 wireless gate-
way and up to 49 SWIFT devices.
Up to 4 wireless gateways can be installed with overlapping net-
work coverage.
RELEASING FEATURES
Ten independent hazards.
Sophisticated cross-zone (three options).
Delay timer and Discharge timers (adjustable).
Abort (four options).
Low-pressure CO
2
listed.

Other manuals for Honeywell Notifier NFS-320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Notifier NFS-320 and is the answer not in the manual?

Honeywell Notifier NFS-320 Specifications

General IconGeneral
BrandHoneywell
ModelNotifier NFS-320
CategoryControl Panel
LanguageEnglish

Related product manuals