NFW-50X Manual — P/N LS10129-001NF-E:C 7/25/2018 45
Optional Module Installation Installation
2.8.5 FWSG Wireless Gateway
The FWSG connects to the FACP’s SLC connection at TB10. The FWSG can be powered by either the SLC or an external 24 VDC
power source. Refer to the SWIFT® Smart Wireless Integrated Fire Technology Manual for more information.
out to next
SLC device
Figure 2.30 FWSG SLC Connection
e
s
5
0
t
o
W
G
.
w
m
f
NFW-50X
FWSG mounting
plate
NOTE: The FWSG, as part of the wireless network, has been tested for compliance with the Federal Communications Commission (FCC)
requirements of the United States Government. It has not been evaluated for use outside the USA. Use of this system outside the USA is
subject to local laws and rules to which this product may not conform. It is the sole responsibility of the user to determine if this product may
be legally used outside the USA.
To Next Page
Loading...
