Do you have a question about the Honeywell Galaxy Flex and is the answer not in the manual?
Brand | Honeywell |
---|---|
Model | Galaxy Flex |
Category | Control Panel |
Language | English |
Defines users, their unique identity, and access levels for system control.
Explains how to set, unset, and manage the alarm system using keypad, tags, or keyfobs.
Describes dividing the system into areas for independent control by different users.
Details the functions of number and function keys on the Mk8 LCD keypad.
Explains how prox readers identify tags/cards and their integration with keypads.
Details the TCB800M and KTC805 keyfobs and their programmable functions.
Step-by-step guide to setting the entire system using keypad, keyfob, or prox tag.
Methods to cancel the system set process while the exit timer is active.
Guide to setting specific detectors while omitting others, using keypad, keyfob, or prox tag.
Instructions on how to cancel a system set process before it is completed.
Details button combinations and their corresponding functions and LED feedback.
Explains how the keyfob LEDs indicate the system's status (e.g., Full Set, Unset).
Procedure to set the system even when faults are present, with an explanation of the process.
Steps to disarm the alarm system using keypad, keyfob, or prox tag.
Process for cancelling an active alarm, noting user permissions and methods.
Steps to restore the system after an alarm or fault, requiring specific user levels.
Procedure for responding to fault conditions, including viewing causes and resetting.
Standard set/unset procedures applied to all assigned groups.
Procedure for selecting specific groups for setting/unsetting, showing group status.
Accesses system setting functions like Omit Zones, Timed Set, Part Set, and Chime.
Allows viewing zone status, event logs, system configuration, and printing reports.
Includes walk tests, output tests, time/date, user codes, and system modifications.
Section for recording installer contact and account information.