Need help?Do you have a question about the Honeywell Gamewell-FCI GWF-7075 and is the answer not in the manual?
General| Type | Fire Alarm Control Panel |
|---|---|
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Relative Humidity | Up to 93% non-condensing |
| Zones | Class B (Style B) initiating device circuits |
| Power Supply | 120 VAC, 60 Hz, 3.2 A |
| Input Voltage | 120/240 VAC, 50/60 Hz |
| Dimensions | 368 mm H x 318 mm W x 89 mm D |
| Weight | 4.5 kg |
| Compatibility | Compatible with Gamewell-FCI devices |
| Agency Listings | UL, FM, CSFM, MEA |
Details the system's fundamental hardware features and capabilities.
Outlines the minimum configuration needed to meet NFPA standards.
Lists relevant industry standards for fire alarm systems.
Covers FCC compliance requirements for telephone line connections.
Details UL requirements for various installation types and restricted options.
Provides guidelines for safe installation locations and temperature ranges.
Offers guidelines to avoid induced noise and ensure proper circuit functioning.
Guides users on determining system power and battery requirements.
Provides instructions for physically mounting the control panel cabinet.
Details the procedure for connecting the control panel to AC power.
Explains how to connect and manage system batteries for backup power.
Covers procedures for calculating SBUS wire distances and configurations.
Details the installation process for the RA-1000 remote annunciator.
Lists compatible Velociti mode SLC detectors and modules with part numbers.
Details wiring requirements for SLC devices based on distance and wire gauge.
Explains how to assign unique addresses to Velociti SLC devices using rotary dials.
Introduces automated system setup and device configuration.
Explains the concept of mapping events to outputs for system functionality.
Introduces the HFSS software for panel programming and configuration.
Lists specific programming options that must be limited for UL 864 compliance.
Details options for editing, adding, deleting, and viewing system modules.
Explains how to customize software options affecting general system operation.
Details the components and display capabilities of the control panel annunciator.
Outlines fundamental system operation procedures and steps.
Details procedures for performing walk tests, with or without reporting.
Guides on verifying detector sensitivity compliance with NFPA 72.
Describes the panel's operational modes and system behavior under various conditions.
Lists compatible receivers and their supported reporting formats.
Provides detailed SIA and Contact ID reporting codes for various system events.
Offers guidance for resolving common hardware problems encountered during installation.
Explains how to use the SLC device locator to identify specific devices on a loop.
Provides a template to track installed Velociti SLC detectors and modules.
Offers a table for documenting the installation details of Velociti SLC detectors and modules.
Lists available characters and their numeric designators for text editing.
Shows available audible and visual output patterns for synchronized appliances.
Maps panel numbers to corresponding receiver numbers for system configuration.
To Next Page