Honeywell Gamewell-FCI GWF-7075 - Programming Menu Quick Reference

44 GWF-7075 Addressable Fire Alarm Control Panel Manual — P/N LS10147-002GF-E:E 06/11/2019
Programming Overview Programming Menu Quick Reference
6.6 Programming Menu Quick Reference
This section of the manual lists all Program Menu options in the order they appear on the sub-menus. In the Options/Defaults column,
Default settings are indicated in text or marked with an asterisk. The Comments column provide quick information and a reference to a
section (if applicable) which includes more detailed information.
Menu Options/Defaults Comments
Module
Edit Module Select Module
Edit Module ID
Section 7.2.1Enter Module Name
Edit Module specific options
Add Module
5824-
Serial/Parallel/
IO
Section 7.2.2
RA-1000 LCD
Annunciator
GFPS-6S NAC
Expander
5880-LED / IO
Module
Module
Delete Module Select Module Section 7.2.3
View Module List Select Module Section 7.2.4
Zone Edit Zone Select Zone
Edit Zone Name Section 7.3.1
Zone Properties
Verification Type
*1-Count
See , "Edit
Zone
Properties"
2-Count
Alarm Ver.
PAS
SNGL ILOCK
DBL ILOCK
Heat Temp Set
135° to 150°F
135° to 190°F
Smoke Sensitivity
Low
, "Edit Zone
Properties"
Medium
High
Zone
(con’t)
Edit Zone Select Zone
Zone Accessory
Opt
Single/Multi-station
Cadence
00-23
, "Zone
Accessory
Options"
CO Single/Multi station
Cadence
00-23
Local Zone
Yes
No
View Zone Points Select Zone to View Section 7.3.2
Group
Edit Group Select Group
Group Name
Section 7.4.1
Group Properties
Template Override Y or N
Dynamic Act/Template
Override Cadence
00-23
View Group Points Select Group
Edit OPG Template Select templateModify name and which OPG’s are in template
Point
Velociti Devices on
Internal SLC
Enter Pt
Select Module
2,3
UNUSED MANUAL PULL Section 7.5.1
WATERFLOW *LATCH
NON-LATCH
FIRE SUPERVSY *LATCH
NON-LATCH
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1 *LATCH
NON-LATCH
ZONE AUX2 LATCH
NON-LATCH
SYSTEM AUX1 LATCH Section 7.5.1
NON-LATCH
SWITCH
1,2,3
SYSTEM AUX2
LATCH
NON-LATCH
DETECTOR
FIRE TAMPER
LATCH
NON-LATCH
MANUAL RELEASE
INTERLOCK
Table 6.5 Programming Menu Options