GWF-7075 Addressable Fire Alarm Control Panel Manual — P/N LS10147-002GF-E:E 06/11/2019 11
Federal Communications Commission (FCC) Agency Listings, Approvals, and Standards
2.2 Federal Communications Commission (FCC)
Before you connect the GWF-7075 to the phone lines, you must provide the following information that must be provided
to the Central Station / Telephone Company. The following information must be provided to the telephone company before
the GWF-7075 can be connected to the phone lines:
In compliance with the FCC Standards, the GWF-7075 fire alarm control panel must be installed as follows:
• Do not connect this device to coin telephone or party line services.
• Do not adjust or repair this device in the field. In case of trouble with the device, notify the installing company or
return the device to:
Honeywell Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610, Phone number: (203) 484-7161
• If the GWF-7075 causes harm to the telephone network, the Telephone Company notifies the user in advance that
temporary discontinuance of service may be required. If advance notice is not practical, the Telephone Company
notifies the user as soon as possible. Users have the right to file complaints, if necessary, with the Federal
Communications Commission.
• The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the
operation of the equipment. If this occurs, the telephone company will provide advance notice to allow you to make
the necessary modifications to maintain uninterrupted service.
• This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
• If the Telephone Company requires the product identifier, refer to the label on the Wiring Diagram. On the label,
provide the format US: HS9AL10A2100.
• On the wiring diagram of this equipment is a label that contains, among other information, a product identifier in the
format US: HS9AL10A2100. If requested, this number must be provided to the telephone company.
• See Section 4.9 for phone jack information.
• A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
• The REN (ringer equivalence number) provided in this manual is used to determine the number of devices that may be
connected to the public switched telephone network. This number must not exceed 5.0. Since this product has an REN
of 1.0A, the number of devices is limited. The REN number is embedded in the FCC registration number as 10A.
• If this equipment GWF-7075 causes harm to the telephone network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if
you believe it is necessary.
• The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone company will provide advance notice in order for you to
make necessary modifications to maintain uninterrupted service.
• If trouble is experienced with the GWF-7075, for repair or warranty information, please contact Honeywell technical
support www.gamewell-fci-essd.com. If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the GWF-7075 until the problem has been resolved.
• See warranty in back of this manual for repair and replacement information.
• Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information.
• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this
GWF-7075 does not disable your alarm equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or qualified installer.
Honeywell-Gamewell-FCI Documents
Compatibility Addendum for Gamewell-FCI Manuals, P/N:9000-0427-L8
E3 Series
®
Basic Fire System UL Listing Document, P/N:LS10080-051GF-E
Honeywell Document
TC810S1000 Releasing Control Module, Installation/Maintenance Instructions, P/N: I56-3367-000
Telephone Company Required Information Manufacturer
A Manufacturer: Honeywell
B Model Number: GWF-7075
C FCC registration number: US: HS9AL10A2100
Ringer equivalence: 1.0A
D Type of jack: RJ31X
E Facility Interface Codes: Loop Start: 02LS2
F Service Order Code: 9.0F
Table 2.1 GWF-7075 Manufacturer Information for Telephone Company
WARNING: THIS DEVICE HAS BEEN VERIFIED TO COMPLY WITH FCC RULES PART 15. OPERATION IS SUBJECT
TO THE FOLLOWING CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE RADIO INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
To Next Page
Loading...
