15
Menu mode
To enter menu mode:
Enter your PIN code, and then press
ent
. The first menu category is displayed.
You can then:
Navigate around the menu using the scroll keys (
A
and
B
), the
ent
key and the
esc
key.
Jump to any specific menu item directly by typing the number of the item
followed by
ent
.
An overview of all the accessible functions is shown below. You may not be able
to access all of the functions controlled by your user type, which is set up in
Modify Level (
42 ent 2 ent
).
Table 3 Menu access
10=Setting 20=Display 30=Test 40=Modify
11=Omit Zones 21=Display Zones 31=Walk Test 41=Time/Date
12=Timed Set 22=Display Log 32=Outputs 42=Codes
13=Part Set 23=System 43=Summer
14=Forced Set 24=Print 44=Trace
15=Chime 25=Access Doors 45=Timer Control
16=Instant Set 46=Group Omit
17=Silent Part 47=Remote Access
18=Home Set 48=Eng. Access
19=All Set
The function of each menu item is described in the following pages.
10=SETTING
[ent] to Select
To Next Page
Loading...
Need help?
General
