25
6=Batch DCM Rdr
Use this option to set the DCM reader used for enrolment. Press
to return the
system to the default reader.
7=Template User
Use this option to turn a user’s access authority and non-unique attributes into a
template, when using the 1=Add Batch function.
Summer (43 ent)
Use this option to change the summer time start and end dates.
Trace (44 ent)
This option records:
The most recent alarm activation.
Details of system setting and unsetting immediately before and after the alarm
activation.
The first five events occurring during the alarm activation.
The information is maintained in the trace until the next alarm activation.
Press
#
while viewing the Trace option to display additional information about
certain events. User events reveal the keypad, user level and current group. Alarm
events reveal the zone descriptor if programmed.
To print the currently displayed trace, press
. To abort the printout, press
esc
.
Timer Control (45 ent)
This option allows you to view and control schedules and holidays.
Group Omit (46 ent)
This option allows a type 6 user to block omit all the omittable zones that are open
at the end of the confirm time in a group or multiple groups.
Remote Access (47 ent)
Use this option to initiate a remote service call when required by the installation
company. It allows the alarm system to be remotely monitored and reprogrammed.
WARNING: Only use this option when requested by your installation
company.
To Next Page
Loading...
Need help?
General
