19
System (23 ent)
Use this option to see an overview of the system configuration. Two lines of
information are displayed at a time.
Groups
Groups 1 to 8 are displayed
Group status
U = Unset, S = Set, P = Part set and L = Locked-out for each
of the groups displayed
Version
Software version
RIOs fitted
Includes the onboard RIOs
Codes used
Includes the manager, engineer and remote codes
Keypads fitted
1 to 8
Comms modules
1 to 7 (GSM, ISDN, Ethernet Module, Int Telecom, USB,
Audio Module)
Printer
0 to 1 (Printer Interface Module)
MAX modules
Displays the number of MAX modules on the system
DCM modules
Displays the number of door control modules on the system
MUX modules
Displays the number of MUX modules on the system
RF portals
Displays the number of RF Portals on the system
Panel location
Up to 16 characters of text entered by the installer
Default set
Displays the language and country default setting
Print (24 ent)
Use this option to print system settings when a printer is connected to the system.
These sub-menu options are available:
1=Codes
Prints a list of all users on the system
2=Zones
Prints a list of all zones on the system
3=Log
Prints the event log
4=All
Prints options 1, 2 and 3
When an option is selected, a printing is in progress message is displayed.
To Next Page
Loading...
Need help?
General
