Honeywell VisionPRO IAQ Installation Guide

VisionPRO
®
IAQ
5
0300
0310
0320
0330
0340
0342
0345
0346
0350
0360
0365
0370
0372
0374
0379
Manual/Auto
changeover
Auto changeover
deadband
Temperature
display
Daylight savings
Indoor temp.
sensor
Outdoor temp.
sensor
Dual fuel heat
pump control
Dual fuel heat
pump upstage to
furnace timer
Heat pump
compressor lockout
Heat pump
auxiliary lockout
Discharge temp.
sensor
Indoor humidity
sensor
Indoor humidifica-
tion control
Humidifier fan
action
Dehumidification
control
0 Manual (User options: Heat/Cool/Off)
1 Automatic (User options: Heat/Cool/Auto/Off)
(System selects heat/cool based on indoor temp.)
3 Heat/cool settings 3°F apart (1.5°C)
[Other options: 2-9 (2°F to 9°F/1°C to 5°C)]
0 Fahrenheit
1 Celsius
1 Auto-change to daylight savings time (through 2006,
and for areas that do not use the new 2007 DST calendar)
2 Auto-change to daylight savings time (2007 and beyond,
for areas that use the new 2007 DST calendar)
0 Daylight savings time is turned off
0 Display temp. at thermostat location only
1 Display temp. at indoor sensor location(s)
2 Average between thermostat & sensor location(s)
E Auto Discover **
0 None
1 Remote sensor
1 Balance point plus 2°F droop **
0 Balance point only **
2 Balance point/Aux Heat Lockout plus 2°F droop **
60 60 minutes **
[Other options: 0, 30, 45 or 75 minutes]
0 No compressor lockout **
[Other options: 5 to 60°F (-15°C to 15.5°C)]
0 No heat pump auxiliary lockout **
[Other options: 5 to 65°F (-15°C to 18.5°C)]
E Auto Discover **
0No
1Yes
1 Internal sensor in thermostat
0 Sensors disabled
2 External sensor
E Auto Discover **
E Auto Discover **
0Off
1 Humidify (no frost protection)
3 Humidify (with frost protection)
0 Humidify only while fan or heat is on
1 Humidify forces fan on
2 Humidify only when heat is on
3 Humidifier operates independent of fan
0 No dehumidification control
1 Dehumidify with air conditioner
3 Whole house dehumidifier
** See page 8
Installer setup (English: Page 4 • Français: Page 10 • Español: Página 16)
Setup functions Settings & Options (factory default in bold)

Honeywell VisionPRO IAQ Specifications

General

Brand	Honeywell
Model	VisionPRO IAQ
Category	Thermostat
Language	English