21 69-2761EFS—03
Adjusting humidification settings
1 Touch MENU and select Humidification.
2 Select Auto.
3 Touch s or t to select humidity level.
4 Touch Done to save your settings. Touch
Cancel to ignore changes.
5 If frost or condensation appears on the
windows, touch MENU, then select Window
Protection. (Use a lower number to prevent
frost or condensation. Use a higher number
if indoor air is too dry.)
NOTE: Window Protection is available only
if an outdoor air sensor is installed.
NOTE: The thermostat controls
humidification and dehumidification as
needed to maintain the desired humidity
level. Depending on how your thermostat
was installed, the thermostat may maintain
a 15% separation between humidification
and dehumidification settings.
Humidification
Window Protection
Humidification
Off Auto
To Next Page
Loading...
