Honeywell W8635B

T8635L MICROELECTRONIC COMMUNICATING PROGRAMMABLE THERMOSTAT
13 69-1331—5
SETTINGS
Setting Current Day and Time
1. Press Set Current Day/Time key.
NOTE: On initial powerup or after an extended
power loss, 1:00pm flashes in the dis-
play until a key is pressed.
2. Press Day key until the current day is displayed.
Table 7. Advanced Setup Options.
(For reference only. Do not change any of these settings.)
Advanced
Installer
Setup
Number
(Press
key to
change) Description
Default Setting
Other Options Press ▲ or
▼ key to change)
Display Description Display Description
62
Equipment Type 1
st
Stage
of Heat
1, 2, 3,
4 or 5
1 - Natural gas or oil heating.
2 - Free heating (outside) air
without ventilation.
3 - Free heating (outside) air
with ventilation.
4 - Compressor heating (heat
pump).
5 - Electric heating.
Default display indicates the
equipment that was found
during Discovery mode.
1, 2, 3,
4 or 5
1 - Natural gas or oil
heating.
2 - Free heating (outside)
air without ventilation.
3 - Free heating (outside)
air with ventilation.
4 - Compressor heating
(heat pump).
5 - Electric heating.
Default display indicates
the equipment that was
found during Discovery
mode.
63
Equipment Type 2
nd
Stage of Heat
64
Equipment Type 3
rd
Stage
of Heat
65
Equipment Type 1
st
Stage
of Emergency Heat
67
Equipment Type 2
nd
Stage of Emergency Heat
68
Equipment Type 1
st
Stage
of Cool
1, 2, 3,
4 or 5
1 - Evaporative cooling.
2 - Free cooling (outside) air
without ventilation.
3 - Free cooling (outside) air
with ventilation.
4 - Compressor cooling.
Default display indicates the
equipment that was found
during Discovery mode.
1 - Evaporative cooling.
2 - Free cooling (outside)
air without ventilation.
3 - Free cooling (outside)
air with ventilation.
4 - Compressor cooling.
Default display indicates
the equipment that was
found during Discovery
mode.
69
Equipment Type 2
nd
Stage of Cool
70
Equipment Type 3
rd
Stage
of Cool
72
Equipment ID 1
st
Stage of
Heat
0, 1, 2
or 3
This is a unique identification
number corresponding to the
equipment assigned the
same number.
Default display indicates the
equipment that was found
during Discovery mode.
0, 1, 2
or 3
This is a unique
identification number
corresponding to the
equipment assigned the
same number.
73
Equipment ID 2
nd
Stage of
Heat
74
Equipment ID 3
rd
Stage of
Heat
76
Equipment ID 1
st
Stage of
Emergency Heat
77
Equipment ID 2
nd
Stage of
Emergency Heat
78
Equipment ID 1
st
Stage of
Cool
79
Equipment ID 2
nd
Stage of
Cool
80
Equipment ID 3
rd
Stage of
Cool
Time
Set Program
SystemFilter Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
M1776
7
Set Current
Day/Time
Set Day/Time
Mon
PM
Time
Set Program
SystemFilter Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
M17768
Day
Set Day/Time
PM
Tue