Honeywell WebVision - Page 161

WEBVISION™
161 95-7769—01
Nvo Occupancy _occupancy X X X Occupied
Unoccupied
Bypass
Standby
Default
Nvo Cool U T M L _value X X X Units=%
Precision=1
Min=0.0
Max=100.0
Nvo Cool U T M L _state X X X Off
On
Default
Nvo Heat U T M L _value X X X Units=%
Precision=1
Min=0.0
Max=100.0
Nvo Heat U T M L _state X X X Off
On
Default
Nvo Bypass _value X X X Units=%
Precision=1
Min=0.0
Max=100.0
Nvo Bypass _state X X X Off
On
Default
Nvo F T Status _effective Set Point X X X Units=null
Precision=1
Min=-inf
Max=+inf
Nvo F T Status _cntrl Sensor X X X Units=null
Precision=1
Min=-inf
Max=+inf
Nvo F T Status _reset Amount X X X Units=null
Precision=1
Min=-inf
Max=+inf
Nvo F T Status _bypass Remaining X X X Units=null
Precision=0
Min=0.0
Max=65535.0
Nvo F T Status _manual Mode X X X Enable
Disable
Manual
Nvo F T Status _effect Occupancy X X X Occupied
Unoccupied
Bypass
Standby
Default
Nvo F T Status _sched Occupancy X X X Occupied
Unoccupied
Bypass
Standby
Default
Table 91. XL15C Application of Points. (Continued)
Point Name Graphics Alarms Trends Commandable Internal Use Valid Values