Honeywell Xenon XP 1950h - Beeper Modes; Trigger Modes

7
Very Low Beeper (Nighttime Mode)
The following bar code programs the scanner for a very low
beep. When a bar code is scanned, the scanner emits a very soft
beep.
Low Beeper (Daytime Mode)
The following bar code programs the scanner for a low volume.
When a bar code is scanned, the scanner emits a low beep.
Trigger
The following bar codes will allow you to use the scanner in
Manual Trigger - Normal Mode (need to press the trigger to
read) or Presentation mode (the scanner is activated when it
“sees” a bar code).
Nighttime Mode
Daytime Mode
Manual Trigger - Normal
(Default)
Presentation Mode