Need help?Do you have a question about the Honeywell Xenon 1952H and is the answer not in the manual?
General| Storage temperature (T-T) | -40 - 70 °C |
|---|---|
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Type | Handheld bar code reader |
| Sensor type | - |
| Scanner type | 1D/2D |
| Pitch reading angle | -45 - 45 ° |
| Light levels (direct sunlight) | 0 - 100000 lx |
| Linear (1D) barcodes supported | Code 128, Code 39, U.P.C. |
| Optical sensor resolution (W x H) | 1240 x 800 pixels |
| 2D (matrix & stacked) barcodes supported | Data Matrix, PDF417, QR Code |
| Battery life | 14 h |
| Charging time | 4.5 h |
| Battery capacity | 2400 mAh |
| Power source type | Battery |
| Number of reads per charge | 50000 |
| Product color | White |
| LED indicators | Yes |
| Built-in display | No |
| Housing material | Plastic |
| International Protection (IP) code | IP41 |
| Wireless range | 10 m |
| Bluetooth version | 4.2 |
| Operating frequency | 2400 MHz |
| Standard interfaces | USB |
| Connectivity technology | Wired & Wireless |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 99 mm |
|---|---|
| Width | 64 mm |
| Height | 165 mm |
| Weight | 220 g |
Details on connecting scanners and bases via USB, Keyboard Wedge, RS232, and RS485.
Describes using Plug and Play barcodes for instant scanner setup for common interfaces.
Explains the role of the base/AP in providing the link and communication for cordless scanners.
Step-by-step guide for establishing a wireless connection between the scanner and its base/AP.
Covers battery recommendations, charging, and safety guidelines for lithium batteries.
Details mechanical, electrical, and environmental specs for corded models.
Covers mechanical, electrical, environmental, and radio specs for cordless models.
Outlines mechanical, electrical, environmental, and use time specs for BF models.
To Next Page