EasyManuals Logo

Honeywell Xenon 1952H User Manual

Honeywell Xenon 1952H
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
72 Xenon XP User Guide
version 2.1 or higher. When SSP is on, no PIN is required for pairing. Turn SSP off if
you are connecting to a Bluetooth device that is not using a compatible Bluetooth
version. Default = Bluetooth SSP On.
Bluetooth HID Keyboard Connect
Your scanner can be paired with Bluetooth-capable devices, such as personal
computers, laptops, and tablets, so that scanned data appears on your device
screen as though it was entered on the keyboard. In order to pair with the Bluetooth
device:
1. Scan the appropriate Bluetooth HID Keyboard Connect barcode below.
2. Set your personal computer, laptop or tablet so it searches for other Bluetooth
devices. (Refer to your device’s User Guide for pairing instructions.)
3. Select the scanner name on your device. Some devices will automatically pair
with the scanner. If your device pairs automatically with the scanner, it displays
a successful pairing message and you do not need to continue to the next step.
4. If your device does not automatically pair with the scanner, a PIN is displayed.
This PIN must be scanned within 60 seconds. Quickly scan Bluetooth PIN
Code below, then scan the numeric barcode(s) for the PIN code from the chart
below, then scan Save.
* Bluetooth SSP On
Bluetooth SSP Off
Bluetooth HID Keyboard
Connect
Bluetooth HID Japanese
Keyboard Connect
Bluetooth PIN Code

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Xenon 1952H and is the answer not in the manual?

Honeywell Xenon 1952H Specifications

General IconGeneral
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)0 - 95 %
TypeHandheld bar code reader
Sensor type-
Scanner type1D/2D
Pitch reading angle-45 - 45 °
Light levels (direct sunlight)0 - 100000 lx
Linear (1D) barcodes supportedCode 128, Code 39, U.P.C.
Optical sensor resolution (W x H)1240 x 800 pixels
2D (matrix & stacked) barcodes supportedData Matrix, PDF417, QR Code
Battery life14 h
Charging time4.5 h
Battery capacity2400 mAh
Power source typeBattery
Number of reads per charge50000
Product colorWhite
LED indicatorsYes
Built-in displayNo
Housing materialPlastic
International Protection (IP) codeIP41
Wireless range10 m
Bluetooth version4.2
Operating frequency2400 MHz
Standard interfacesUSB
Connectivity technologyWired & Wireless
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth99 mm
Width64 mm
Height165 mm
Weight220 g

Related product manuals