Need help?Do you have a question about the Honeywell Xenon 1910 and is the answer not in the manual?
General| Type | Handheld |
|---|---|
| Scanning Technology | Area Imager |
| Scan Rate | 100 scans per second |
| Connectivity | USB, RS-232, Keyboard Wedge |
| Decode Capability | 1D barcodes |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Drop Specification | 6 ft (1.83 m) drops to concrete |
| Motion Tolerance | Up to 24 inches per second |
| Humidity | 5% to 95% (non-condensing) |
| Light Levels | 0 to 100, 000 lux |
Overview of the guide and device unpacking instructions.
Instructions for connecting scanners and bases via USB, Keyboard Wedge, RS232, and RS485.
Explains aiming patterns and techniques for Xenon and Granit scanners.
Covers Menu Bar Code Security and setting/resetting custom defaults.
Guides for setting up USB (HID, Serial, SurePos) and RS232/RS485 interfaces.
Instructions for Verifone, Gilbarco, Honeywell Bioptic, Datalogic, NCR, and Wincor Nixdorf.
Setting keyboard country layout, style, conversion, modifiers, and control characters.
Steps to link scanners to charge bases and access points for cordless operation.
Information on battery installation, charging, recommendations, and safety.
Describes batch mode for storing data when out of range, including storage and quantity settings.
Covers Bluetooth pairing, HID connect, serial port, and PIN code management.
Configures power-up beeps, BEL character beeps, trigger clicks, and good read/error indicators.
Manages manual trigger modes, serial trigger, and presentation modes for hands-free scanning.
Manages preferred symbology, output sequences, multiple symbols, no-read reporting, and video reverse.
Configures silent modes with flashing or long LEDs, and very low/low beeper options.
Adjusts linking LED colors, number of LED flashes, flash rate, solid LEDs, paging volume, and alarm volume.
Instructions to add, clear, or manage prefixes and suffixes for symbologies.
Manages function code transmission and intercharacter, interfunction, intermessage delays.
Introduction to creating and applying data formats to scanned data.
Details on commands for sending characters, inserting strings, moving cursors, and searching.
How to enable all symbologies or select specific ones for decoding.
Covers Codabar, Code 39, Interleaved 2 of 5, NEC 2 of 5, and other symbology configurations.
Explains Image Snap (IMGSNP) and Image Ship (IMGSHP) commands with modifiers.
Details on IMGBOX command for signature capture area configuration.
Explains how keyboard function codes, HEX/ASCII values, and CTRL+X map to terminal keys.
How to view decoder, scan driver, software revisions, and data format settings.
Introduction to the PC software for scanner configuration, firmware updates, and bar code generation.
Procedure to reset scanner settings to factory defaults.
Explains conventions, syntax, tags, sub tags, data fields, and storage for serial commands.
How to use query characters (^, ?, *) to get device settings and responses.
A detailed table mapping selections, settings, serial commands, and page numbers.
Technical specifications for Xenon 1900/1910 corded and 1902/1912 cordless scanners.
Technical specifications for Granit 1910i/1911i corded and cordless scanners.
Specifications for CCB01-010BT and CCB02-100BT charge bases.
Performance data for Xenon B&W and Color scanners, showing typical and guaranteed ranges.
Instructions for cleaning the scanner housing, window, and health care housing.
Guides for replacing interface cables in corded scanners and batteries in cordless systems.
Steps to diagnose and resolve issues with power, symbols, and incorrect reads for corded scanners.
Guidance for troubleshooting base and scanner issues in cordless systems, including LED indicators.
Information on accessing knowledge base, support portal, web form, and telephone support.
Details on obtaining service, warranty terms, and limitations for Honeywell products.
Lists AIM and Honeywell IDs and modifiers for various linear symbologies.
Lists AIM and Honeywell IDs and modifiers for 2D and postal symbologies.
Provides ASCII control character mapping and printable character tables for different keyboard layouts.
To Next Page
